"A Guide To Autowatch Ghost Immobiliser Fitting In 2023
Ghost Immobiliser Installation
Install a ghost immobiliser on your vehicle to protect it from car thieves. Our TASSA verified system protects vehicles against hacking, key cloning and immobiliser bypassing.
The system is hidden within the wiring loom in your vehicle and is inaccessible to anyone who is looking. It is created by generating the pin code push sequence through buttons already on the steering wheel doors, door cards and the center console.
No circuit cuts
It's not a surprise that people are keen to secure the vehicle they have worked so hard to buy. But, traditional security systems like alarms and wheel locks could easily be cut off or jumped by thieves. Ghost immobilisers, on the other hand is a highly efficient solution that is silent and isn't easily detected by modern thieves.
Ghost immobilisers are hidden device that connects to the CAN data network of your vehicle to shut down the engine without the use of radio frequencies or key fobs. It communicates with the ECU of your vehicle by using buttons on the dash, Autowatch Ghost Immobiliser Fitting steering wheel and door panels. This creates an individual pincode that is only available to you. The code can be altered at any time and can contain up to 20 numbers based on your preferences. It also comes with a safe emergency code you can use should you forget your PIN.
The ghost immobiliser can also be helpful to prevent the relay box at your home from transmitting the signal from your car key, which could open the doors and start your vehicle. It also blocks sophisticated methods to steal your vehicle, such as OBD port hacking. The device is tiny, weatherproof and difficult to see. It's also hard to tamper.
The ghost immobiliser comes with a further benefit: it can be fitted to your vehicle without leaving any permanent marks. This makes it perfect for those who intend to sell their vehicle in the near future. It's also much faster and easier to install than the factory-installed system.
The Autowatch Ghost, a groundbreaking new generation device, stops thefts of cars using contactless technology by connecting to a vehicle's CAN network and using the buttons to generate a unique PIN code. This is a stealthy device that can be put in without wires being cut and does not require any additional key fobs. It also connects to the vehicle's original ECU, preventing thieves from gaining access to it using an additional key or replacing the ECU with the use of a "relay". This system has been TASSA-verified and can be linked with an International Security Register. Owners will have peace of mind knowing that their vehicle is secured from theft.
No scanning by RF
You'll want to secure your vehicle from theft if have spent a lot of money and time customizing it. Installing an immobiliser is one of the most effective ways to avoid theft. It will stop your vehicle from starting until you input a unique code. You can create a 20-digit pin by pressing the buttons on your dashboard or the steering wheel. This will ensure that only you have the right to drive your vehicle. You can also set up a valet or service mode that allows you temporarily to start your vehicle without entering the PIN code. This will permit your technician to work on your car without your presence. This is a great feature for people who are looking to cut down on time and make their lives easier.
Ghost immobilisers are next generation device that connects to your vehicle's CAN data network and uses the buttons on the dashboard and steering wheel to program a personal PIN code. It is designed to be discreet, with no light or sound to give it away and can be installed anywhere on the vehicle without affecting the appearance of your prized possession.
This stealthy system is approved by TASSA and can reduce the cost of insurance. It has a tracking function that will locate your vehicle, even if it's been stolen. This is helpful if you own a unique or expensive vehicle that you've invested a lot of time in personalising.
The Autowatch Ghost Immobiliser Fitting ghost immobiliser near me can be used together with an iPhone application to allow you to start your car remotely in the event that you have forgotten your PIN or are not able to enter the vehicle for some reason. This feature is perfect when you need to do some errands, or drop off your kids, but do not want to let someone else drive your car. It is also helpful in the event that you need to bring your vehicle to a mechanic for maintenance or repair.
The Ghost is unique in that it doesn't transmit or detect radio frequency, so it is undetectable by thieves using RF scanning and code grabbing techniques. It also has the ability to safeguard your car from key cloning and ECU swapping, which are the most common methods used to steal cars.
There is no key to cloning
Ghost immobilisers are an excellent method to protect expensive cars and stop key cloning. They stop your car from starting until an additional PIN code is entered in conjunction with the normal key fob. This makes it difficult for thieves to steal your vehicle and can also deter them from doing it in the first place. This is a good idea in the event that your vehicle has been extensively customized or if it's a rare model.
These immobilisers are linked to the vehicle's CAN network and are completely hidden, which means their presence isn't visible. It is also impossible for a thief to detect the device by using radio frequency scanning or code technology for grabbing. This means a thief would need to take longer to take your vehicle.
A thief will need to be aware of the pin code and the exact location of the ghost in order to avoid it. The pin code is unique to you and you can change it as often as you want. The pin code is simple for you to remember but mathematically impossible for anyone else to figure out. Additionally the engineer will have provided you with an emergency PIN code to override if you forget the pin.
The Ghost CAN bus immobiliser is weatherproof, and can be installed in any part of your vehicle. It works with all vehicles and is completely customizable to match the style of your car. It is also very easy to use and cost-effective. You can even transfer the device to a different vehicle if you switch cars during the lifetime of ownership, provided that the new vehicle is compatible with the.
The CAN bus immobiliser is also compatible with many other security features. It can, for example, detect damage to the vehicle and notify the owner. It also can shut down the engine if the car is tampered with. It also helps protect your vehicle from key cloning and hacking. It can also detect vibrations or contact with the vehicle. In addition, it can notify the owner that the vehicle has been moved.
No OBD port hacking
Ghost is an immobiliser hidden in the module that is connected to the CAN data network of your vehicle which stops thieves from gaining access to your vehicle to disable the alarm, deactivate the key fob and generate new keys. This technology is a significant improvement over the traditional methods employed by thieves in the past to take your vehicle. The CAN data network also means that your system won't be affected by disconnecting or change your battery.
The Autowatch Ghost is the world's first aftermarket CAN bus that is a non-detectable immobiliser that guards against key-cloning, hacking, and theft of replica cars. It doesn't use LED indicators or key-fobs. Instead, it utilizes the buttons on your steering wheel, console and door panels.
Modern thieves are able to employ diagnostics to find circuit breakages in your vehicle. They can bypass immobilisers which require a lot wiring or are integrated into the wiring. The Ghost is weatherproof and does not require any additional wiring. It cannot be detected by diagnostic tools of a professional. It can be put in on vehicles with anti-theft devices.
Another advantage of a Ghost immobiliser is that your vehicle is only able to be started by someone who knows the PIN code and has physical access to your vehicle. This is a major advantage over security systems that can be bypassed by simple cable tampering or a screwdriver.
You can easily reset your PIN if forget it by using the emergency PIN reset feature on a computer or mobile phone. This is useful if you need to start your car when it's left in a garage or a valet parking service.
The Autowatch Ghost 2 has been approved for insurance by TASSA and can be installed by our authorized installers. It has the QR fingerprint system to identify parts that are not in use, which allows for the return of stolen items in the event that they are discovered. It can also be turned into a service mode,' which allows the engine to be started when your vehicle is parked in a garage or with valet parking but you will need to enter your PIN code again to exit the vehicle.